Riding Technique

From Beginner to Intermediate: How to Progress Your Pump Track Skills

Learning to complete a lap of a pump track without pedalling is a big first milestone β€” but it's really just the starting point. Once the basics click, there's a clear path of skills to work on that will make you faster, smoother, and more in control. Here's how to move from comfortable beginner to confident intermediate rider.

Intermediate rider navigating asphalt berms and rhythm rollers at Burnaby Mountain Air Bike Skills Course

Know Where You're Starting From

Before working on new skills, it helps to honestly assess where you are. A useful way to check your current level is to ask yourself:

  • Can I complete a full lap without pedalling, on a beginner-friendly track?
  • Am I comfortable looking ahead rather than at my front wheel?
  • Can I maintain a consistent line through berms without braking?
  • Do I feel stable standing on the pedals through rollers?

If you can answer yes to most of these, you're likely ready to start layering in more advanced technique work rather than just repeating laps.

Refine Your Pumping Technique

Beginners often learn a basic version of pumping: push down in the transitions, lighten up over the rollers. The intermediate version of this skill is about timing and precision rather than just repeating the motion.

Focus on:

  • Timing the push: Instead of pushing down at a fixed point on every roller, experiment with pushing slightly earlier or later to see how it affects your speed through the next section.
  • Using your arms and legs together: Beginners often rely mostly on their legs. Adding upper body movement β€” pushing down through the bars as well as the pedals β€” creates a stronger, more controlled pump.
  • Reading roller spacing: Rollers aren't always evenly spaced. Learning to adjust your rhythm to slightly uneven spacing, rather than expecting a constant beat, is a hallmark of a more experienced rider.

Improve Your Cornering

Berms reward commitment and a consistent line, but many riders unconsciously slow down through corners out of caution. A few adjustments can make a noticeable difference:

  • Enter wide, apex late: Similar to cornering on a road bike, entering a berm slightly wide and aiming for a later apex often allows for a faster, smoother exit.
  • Keep your outside pedal down: This is a fundamental cycling technique that also applies on a pump track β€” it lowers your centre of gravity and improves grip through the turn.
  • Look through the exit, not the entry: Where your eyes go, your bike tends to follow. Looking toward where you want to exit the berm β€” rather than the point you're currently at β€” helps maintain a smoother line.

Work on Line Choice

As you get more comfortable, start paying attention to the exact line you take through the track rather than simply staying inside the lane markings.

On many tracks, a slightly different line through a roller section β€” favouring the inside or outside of a berm exit, for example β€” can set up better speed for the next feature. Watching more experienced riders (in person or in videos of similar tracks) can help you see options you hadn't considered on a layout you already know well.

Build Consistency Before Chasing Speed

It's tempting to focus purely on going faster, but consistency is what actually separates beginner and intermediate riders. A rider who can complete the same smooth lap ten times in a row, with the same line and rhythm each time, will generally be faster and safer than one who occasionally hits a fast lap but frequently loses flow.

A useful drill is to aim for a set number of consecutive clean laps β€” meaning no pedalling, no braking through berms, and no loss of line β€” before worrying about lap times at all.

Try Riding Switch or with Restrictions

Once a track feels comfortable, adding small constraints can accelerate your learning:

  • Ride with one hand off the bars briefly on straight sections to build balance (only where safe and appropriate for the facility).
  • Try the track in the opposite direction, if permitted, to work on cornering skills on your weaker side.
  • Practise standing pedal position without pumping at all, focusing purely on absorbing the terrain with your legs.

Always check facility rules before trying variations like riding in the opposite direction, since some tracks enforce a single direction of travel for safety.

Cross-Train on Different Track Layouts

Riding the same local pump track repeatedly builds comfort, but visiting a different track β€” even one that's only a short drive away β€” can expose you to different roller sizes, berm shapes, and surface types that challenge your technique in new ways.

A dirt track requires different traction management than an asphalt one. Riding diverse terrain like pump tracks in British Columbia and pump tracks in Alberta helps develop dynamic balance., while a larger track with bigger rollers demands more commitment through the pump. Rotating between two or three local layouts across pump tracks in Ontario accelerates the transition from beginner to intermediate rider more effectively than sticking to one layout.

Common Plateaus and How to Push Through Them

It's normal to feel like progress slows down after the initial improvement phase. A few common sticking points:

  • Plateauing on speed: Often caused by subtle braking through berms. Filming a lap on your phone can help you spot moments where you're unconsciously scrubbing speed.
  • Struggling with bigger rollers: This is frequently a timing issue rather than a strength issue β€” try adjusting exactly when you push down relative to the shape of the roller.
  • Feeling stuck on one line: If you always take the same path through a section, deliberately try an alternative line during a quiet session to build flexibility.

Frequently Asked Questions

How long does it typically take to go from beginner to intermediate on a pump track?
This varies significantly by rider and how often you practise, but many riders notice meaningful improvement within several sessions once they start focusing on specific skills rather than just riding laps.
Do I need a lighter or different bike to progress on a pump track?
Not necessarily. Technique typically matters more than equipment at the beginner-to-intermediate stage. A well-maintained bike you're already comfortable on is usually a better choice than switching equipment.
Should I focus on speed or smoothness first?
Smoothness and consistency generally come first. Riders who chase speed too early develop habits like excessive braking. Check out our dedicated drills in how to improve your pump track skills that are harder to correct later.
Is it useful to watch other riders to improve?
Yes. Watching more experienced riders β€” either in person at the same track or in videos β€” can help you identify alternative lines and technique adjustments you might not notice on your own.
Can I progress without a coach?
Many riders improve significantly through self-directed practice, especially by filming their own laps and comparing them across sessions. That said, a local BMX or mountain bike club may offer coaching or skills sessions if you want more structured feedback.

Find the Right Track to Practise On

Progressing from beginner to intermediate is often easier with access to more than one track β€” a smaller, forgiving layout for refining technique, and a slightly larger one to test your skills once you're ready for more speed and bigger features.

Browse the findpumptracks.ca by province and city to find nearby tracks with different layouts, surfaces, and difficulty levels, and start building a rotation that keeps your practice varied and effective.

ML
Written by Marc Lefebvre
Senior Cycling Columnist & Pump Track Field Researcher β€’ Published on findpumptracks.ca
← Back to All Blog Articles