First Visit Guide

Your First Pump Track Visit: A Practical Guide From Arrival to Your First Lap

Your first visit to a pump track can be exciting β€” and slightly confusing.

First-time visitor scoping lines and traffic flow at Burnaby bike skills facility

You may arrive and see experienced riders flowing through the rollers and berms without pedalling, while you're still trying to figure out where you're supposed to start.

Don't worry.

You don't need to understand every feature before your first lap. You also don't need to ride fast or copy what experienced riders are doing.

A successful first visit is simply about becoming familiar with the environment, understanding how the track works, and learning a few basic movements at a comfortable pace.

This guide walks through the experience from planning your visit to finishing your first session.

Before You Leave Home

A little preparation can make your first visit much easier.

Start by finding the specific pump track you want to visit and checking its available information.

Look for:

  • Exact location
  • Operating information
  • Permitted equipment
  • Helmet requirements
  • Surface type
  • Photos
  • Available amenities
  • Any posted restrictions

Rules differ between facilities, so don't rely entirely on what you've experienced somewhere else.

If you're travelling with children, check whether the facility appears appropriate for their experience and equipment.

Choose Your Equipment Carefully

You don't necessarily need to purchase a specialized bike before trying a pump track.

The appropriate equipment depends on the facility and its design.

BMX bikes are commonly associated with pump-track riding, while some tracks can also accommodate suitable mountain bikes. Other facilities may permit scooters, balance bikes, or additional equipment.

The important point is simple:

Check what the individual track permits before arriving.

If you're using a bicycle, make sure it is mechanically sound.

Before leaving home, check the tires, brakes if fitted, wheels, handlebars, and anything else that could affect safe control.

You don't need to become a bicycle mechanic.

A basic inspection is enough to catch obvious problems.

Wear a Helmet

A properly fitted helmet should be part of your preparation.

Make sure it sits securely and doesn't move excessively when you turn your head.

If you're riding with children, check their helmets as well.

The facility may have specific helmet requirements, so check the local rules before visiting.

Additional protection such as gloves, knee pads, or elbow pads can also be useful depending on your experience and riding style.

What Should You Wear?

Your clothing should allow you to move freely.

You don't need a specialized outfit for your first session.

Choose comfortable clothing appropriate for the weather and footwear suitable for your equipment.

For bicycle riding, closed-toe shoes are a sensible choice.

Outdoor conditions can change, particularly during Canada (with premier pump tracks in British Columbia and pump tracks in Alberta)'s shoulder seasons, so consider bringing an additional layer when appropriate.

Arrive Early Enough to Look Around

If you're nervous about your first pump track visit, don't arrive and immediately jump onto the circuit.

Take a few minutes to observe.

Walk around the facility if the layout allows it.

Look at the rollers.

Look at the berms.

Notice where people enter and leave.

Watch how experienced riders move around the circuit.

This gives you a mental map before you begin.

You don't need to memorize the entire track.

Simply identify the starting point and understand the general direction of travel.

Read the Signs

Before riding, look for posted information.

This may include:

  • Helmet requirements
  • Permitted equipment
  • Direction of travel
  • Hours of operation
  • Age restrictions
  • Safety instructions
  • Facility-specific rules

The information can vary from one location to another.

If the facility has specific instructions, follow them even if they differ from what you've done at another pump track.

Watch Other Riders

Watching is one of the best ways to understand the flow of a new track.

You can observe how riders approach the first roller, how they enter berms, and where they slow down.

Don't worry about copying their speed.

Instead, pay attention to the general movement.

You'll probably notice that experienced riders aren't simply pedalling around the circuit.

They're moving their bodies with the terrain.

That's the skill you'll gradually learn.

Choose a Quiet Moment

If possible, your first lap should happen when the track isn't extremely busy.

You don't need an empty facility.

You simply want enough space to ride without feeling pressured by faster riders behind you.

A quieter period can also make it easier to stop and reset if you become uncomfortable.

If you're visiting with a child, this can be particularly helpful.

Enter at a Comfortable Speed

Your first lap should be slow.

There is no reason to chase speed.

Your objective is to understand the shape of the track.

Start with the basics:

  • Look ahead
  • Keep your body relaxed
  • Maintain balance
  • Follow the direction of travel
  • Leave space between riders

If you feel uncomfortable, reduce your speed or exit safely.

There is nothing wrong with taking a break.

Don't Worry About Pedalling

Many beginners arrive expecting to pedal constantly.

That's not really the point of a pump track.

The track is designed around rollers and transitions that allow riders to generate and maintain momentum through body movement.

For your first session, don't worry about mastering the technique immediately.

Simply notice how the bike responds as you move over the terrain.

The goal isn't to complete a perfect lap.

The goal is to begin understanding the relationship between your movement and the track.

Start With the Rollers

Rollers are one of the fundamental features of a pump track.

Instead of trying to attack them aggressively, approach them smoothly.

Keep your knees and elbows relaxed.

Allow your body to move with the bike.

As you become more comfortable, begin experimenting with the pumping movement.

The important thing is timing.

The movement should correspond to the shape of the track.

It may feel strange at first.

That's completely normal.

Learn One Movement at a Time

Trying to remember ten instructions while riding can make the experience harder.

Instead, choose one thing to focus on.

For example:

Lap 1: Look ahead.

Lap 2: Relax your arms and legs.

Lap 3: Focus on the pumping movement.

Lap 4: Work on maintaining a smooth line.

You don't need to follow this exact sequence.

The principle is what matters: isolate one skill rather than trying to perfect everything simultaneously.

Approach Berms With Control

Berms are banked turns that allow riders to change direction while maintaining momentum.

For beginners, they can initially feel intimidating.

Don't enter faster simply because other riders do.

Approach at a speed that allows you to remain comfortable and controlled.

Look toward where you want to go rather than staring at the edge of the track.

Try to maintain a smooth line.

As your confidence improves, you'll naturally become more comfortable carrying speed through the turn.

Don't Chase Faster Riders

You will probably encounter people who are much faster than you.

That's normal.

They may have years of experience.

They may know the track extremely well.

They may also be riding a completely different type of equipment.

Don't use their speed as your benchmark.

Your first objective is control.

A slow, smooth lap is far more useful for learning than a fast lap that leaves you struggling to stay balanced.

Leave Space

If someone is behind you, don't panic.

You don't have to immediately get out of the way unless the facility's rules require a particular procedure.

Continue riding predictably.

Don't make sudden movements simply because you know someone faster is approaching.

Experienced riders should also understand that beginners need room.

A shared pump track works best when everyone gives one another reasonable space.

What If You Fall?

Falling is possible while learning.

If you lose balance at low speed, stay calm and assess the situation.

If you're able to move safely, clear yourself and your equipment from the active riding line.

If you're injured, don't put yourself at greater risk trying to move.

For children, parents should remain attentive and make sure the child is comfortable before deciding whether to continue.

There's no requirement to finish a session.

Stopping after a fall can be the right decision.

Take Breaks

Your first pump-track session can be more tiring than expected.

You're constantly balancing, moving your body, absorbing changes in terrain, and concentrating on the track.

Take breaks whenever you need them.

This is particularly important for younger riders.

A short session followed by a break may be more productive than trying to stay on the track continuously.

Don't Attempt Every Feature

A pump track may contain features that are beyond your current ability.

That's okay.

You don't have to ride every roller, jump, or technical section simply because it exists.

If a feature looks too difficult, observe other riders and continue with the sections you're comfortable with.

Progress should happen gradually.

How to Know You're Improving

You don't need a stopwatch to measure progress.

Look for practical improvements.

Can you now:

  • Complete a lap without losing your balance?
  • Look further ahead?
  • Move through rollers more smoothly?
  • Enter berms with more confidence?
  • Reduce unnecessary braking?
  • Maintain momentum for longer?
  • Ride without feeling tense?

These are meaningful signs of improvement.

Speed can come later.

A Good First Session

A simple first session might look like this:

Before riding

Check the rules and inspect your equipment.

On arrival

Watch the track and understand the direction of travel.

First lap

Ride slowly and learn the layout.

Second lap

Focus on your body position.

Third lap

Experiment with pumping.

Break

Rest, drink water, and think about what felt difficult.

Final laps

Repeat the sections that felt comfortable and stop before fatigue affects your control.

There is no requirement to follow this exact structure.

The idea is simply to keep your first experience relaxed and manageable.

Visiting With a Child

Children may need a slightly different approach.

Before entering, explain the basic rules in simple language.

Tell them to:

  • Follow the direction of travel
  • Look ahead
  • Leave space
  • Avoid stopping in the riding line
  • Listen to instructions
  • Tell an adult if they become tired or uncomfortable

Choose a track appropriate for their equipment and experience.

A child doesn't need to complete the entire circuit.

Even practising on a small section can be a successful first experience.

What If the Track Is Too Busy?

You have several options.

Wait.

Take a break.

Visit another time.

Or choose another nearby facility if your plans allow.

The directory can help you identify alternative pump tracks in the same city or region.

Don't feel pressured to ride simply because you've already made the trip.

A busy track can be difficult for a beginner, particularly when riders have very different speeds.

What to Do After Your Session

Before leaving, take a moment to check your equipment.

If your bike has collected dirt or debris, clean it when appropriate.

If you noticed something unusual during the session β€” such as a loose component or mechanical issue β€” address it before your next ride.

It's also useful to remember what you enjoyed and what you found difficult.

That information can help you choose your next track.

Perhaps you want a smaller layout.

Perhaps you're ready for more challenging berms.

Perhaps you simply want to return to the same track and practise.

Finding Your Next Track

Once you've completed your first session, the next step is finding somewhere suitable for your next ride.

The findpumptracks.ca lets you browse facilities by province and city.

Individual listings can help you research locations before travelling, including available information about the facility, photos, surface, amenities, and other details when available.

Always verify important rules and current operating information with the facility or municipality before your visit.

Frequently Asked Questions

Do I need experience before visiting a pump track?
No. Beginners can start at an appropriate facility and learn basic bike control progressively.
Do I need a special BMX bike?
Not necessarily. Equipment requirements vary by facility, and some tracks permit different types of bikes or other riding equipment.
What should I do if I feel nervous?
Watch the track first, choose a quieter moment, start slowly, and focus on control rather than speed.
How long should my first session be?
There is no universal ideal duration. Ride for as long as you can maintain concentration and control, and take breaks when necessary.
What if I can't complete a full lap?
That's completely fine. Practising one section repeatedly can still be valuable.

Your First Pump Track Doesn't Have to Be Perfect

The first session isn't about speed, tricks, or completing the track without mistakes.

It's about becoming comfortable.

Once you understand how the track flows and how your body interacts with the rollers and berms, the experience becomes much more intuitive.

Start slowly, respect the other riders, follow the local rules, and give yourself time to learn.

Then use the findpumptracks.ca to discover another facility when you're ready to explore somewhere new.

ML
Written by Marc Lefebvre
Senior Cycling Columnist & Pump Track Field Researcher β€’ Published on findpumptracks.ca
← Back to All Blog Articles